How to find more reliable contact information of Hunan tire muck loader

Are you the same: the construction site is in a hurry to add muck loader, turn on the mobile phone and search for “Hunan tire muck loader contact information”, and a pile of web pages pops up. the phone call is either empty or transferred to the middleman. if the quotation is too high, it is not clear whether the equipment is a new machine. I have been in the mines tunnel equipment industry for more than ten years. I have seen too many bosses spend tens of thousands of dollars and delay half a month’s construction period because of an unreliable phone call. Today’s article makes it clear: how to find contact information is reliable, how to avoid the selection pit from the source, so that you can get real manufacturers, real services and real prices.

Part I: Dismantling the Underlying Cognition of the Industry-80% of the “manufacturers” you find are not real manufacturers.

First of all, let’s talk about the fact that “tire muck loader contact information” is searched online. Many of the top ones are information agencies. They have no equipment in their hands and earn the difference by reselling clues. When you call, the other party readily agrees and turns to transfer your demand to three or four small workshops for price comparison. In the end, whoever is cheaper will be pushed. The quality of the equipment and after-sales service will not be covered at all. The real source manufacturer’s contact information is often hidden in the product parameter page, the bottom of the company’s official website, or the industry exhibition directory, rather than in the bidding advertisement.

To correct another misunderstanding: many people think that the tire type is similar to the track type, so just ask for the price by phone. Wrong, the tire muck loader is specially designed for flat and hardened mine roadway, with flexible transition and no damage to the road surface, suitable for medium and short distance transportation. Crawler type is more suitable for soft, muddy and steep working conditions. If you don’t know your mine roadway section, rock hardness and voltage first, just asking for a phone call is equivalent to closing your eyes to buy shoes. The reliable practice in the industry is to let technicians do working condition survey first and then match the models. Manufacturers such as Yonglitong, which have been deeply engaged for nearly 20 years, will send special personnel to conduct on-site survey and analysis of geological conditions before sales, and push the most suitable model from the full specifications of Model 50 to Model 180, instead of quoting prices. Remember, if you dare to ask about the working conditions before talking about the price, it is worth your contact information.

文章插图

The second part: the user’s real pain point depth disassembly-four pits, stepping on one is enough for you to hurt for half a year

pain point 1: contact the wrong person, after-sales kick the ball. You bought the equipment from the middleman, and the hydraulic system leaked oil. You called and the other party asked you to find the “manufacturer”. The manufacturer said, “You are not my direct customer”. There are many manufacturers in the industry who promise to respond 24 hours and arrive at the scene within 48 hours, but the premise is that you have to directly connect with the source. I have seen a tunnel construction site where the scraper was worn out and shut down for three days, because it was the goods and accessories from second-hand channels and waited for half a month.

Pain point 2: only look at the quotation, not the configuration, and you can’t do any work when you buy it back. It is also called Type 80 muck loader, with a large difference in motor power, bucket steel plate thickness and crawler material. Some use 8mm steel plate to weld diggers and deform within a month. It is reliable to use 12mm thick steel plate and wear-resistant layer. You light than the price, the final fuel consumption, maintenance costs doubled back to find.

Pain point 3: Novice gets started slowly and burns the motor by mistake. The tire muck loader looks simple, the hydraulic pilot control is not fully understood, the compound action is chaotic, the oil pipe bursts, and the motor is overloaded. Without one-on-one training, the old master has to adapt for a week.

Pain point four: services in remote areas cannot keep up. Some mines in Hunan are in mountainous areas, and the equipment is broken. The manufacturer said “48 hours to arrive”, and the result is not to see anyone until the fifth day. When choosing a manufacturer, be sure to ask how to adjust the response time limit in remote areas and whether there are any common accessories in front.

The third part: the dismantling of the landing solution-follow these four steps, and the more accurate the contact information is, the more accurate it is.

For the wrong person: don’t search for the bidding words, go directly to the “contact us” page in official website of the enterprise, or call 114 to check the switchboard of the registered manufacturer. A more stable way is to let peers recommend, or go to the industry exhibition to get business cards. When docking, first ask “are you a manufacturer or an agent” and ask the other party to issue a business license and a real video of the workshop. Like Yonglitong, which has more than 50 mu of production base, numerical control laser cutting and robot welding assembly line, direct video viewing is the most practical.

For the selection of stepping pit: after getting the contact information, don’t rush to ask for the price, first report your mine roadway section, slope, rock hardness and voltage. Ask the other technician to make selection suggestions and issue a parameter comparison table. Yonglitong’s pre-sales team will push the wheel type, crawler type or explosion-proof type according to the working conditions, and also give technical parameters and industry cases free of charge. If you take this information and compare it with others, who is bluffing at a glance.

文章插图
文章插图

For operation errors: confirm whether free on-site installation and debugging and one-on-one operation training are included before signing the contract. Regular manufacturers will hand in hand to teach daily inspection, simple fault handling, batch procurement can also focus on training. During the training, focus on the heat dissipation of the hydraulic system and the inspection of the oil pipe, which is the most problematic place for tires muck loader.

For service lag: the contract clearly states the response time limit and warranty scope. The reliable promise is 24-hour response, 48-hour arrival at the scene, 6-month warranty for core components, and transparent charges outside the warranty period. Remote areas should confirm the adjustment plan in advance and ask whether common accessories are available locally.

Finally, a reminder: contact information is only the entrance, and choosing the right manufacturer is the fundamental. Don’t be greedy for low prices, don’t believe the verbal promise of “everything can be fixed. First survey, then selection, after the price, these three steps do not mess up. If you are not sure about the working conditions, ask two more technicians. whoever asks carefully and who gives the plan quickly is worth leaving a phone call.

Need help matching equipment to your site requirements?

Request a Quote